MIL-T-8504

MIL-T-8504 tubing

Manufacturers of MIL-T-8504 Tube, MIL-T-8504 Welded stainless Steel Tube and 304 mil-t-8504 Suppliers in Mumbai


Exporters of Stainless Steel 304 AMS T 8504 Tubing, Suppliers of MIL-T-8504 Steel, MIL-T-8504 Corrosion Resistant (18-8) Annealed Tubing, MIL-T-8504 Aircraft Hydraulic System tubing Manufacturer in India


MIL-T-8504 Tube
MIL-T-8504 Tube
MIL-T-8504 TP304 Seamless Tube
MIL-T-8504 Seamless Tube
MIL-T-8504 TP304 stainless Tubing
MIL-T-8504 Welded Tube

TRILOK STEEL INDUSTRIES is well known supplier and manufacturer of MIL-T-8504 Tube. MIL-T-8504 spec for use in high pressure hydraulic and pneumatic systems in which corrosion resistant materials are required. MIL-T-8504 tubing is of lower strength and higher ductility than tubing to Specification MIL-T-6845. May be used to replace MIL-T-6845 tubing but heavier wall thicknesses must be used: Same qualifications regarding welding, brazing & temperature.


MIL-T-8504 Specification (Seamless & Welded )

MIL-T-8504 Tubing Stock Size Range:
OD:250"- 5"
Walls:.006"- .250"

 

MISC SPECGRADE OR PROCESSDESCRIPTION
MIL-T-8504304TUBING, STEEL, CORROSION-RESISTANT (S30400), AEROSPACE VEHICLE HYDRAULIC SYSTEM 1/8 HARD CONDITION

MaterialSpecification NumberTemper
U.S. Govt.SAE
304 SeamlessMIL-T-8506Annealed
304 WeldedMIL-T-8506Annealed
304L SeamlessMIL-T-8606Annealed

Attribute Value
SpecificationsAMS-T-8504, MIL-T-8504, AMS 5566
AMS NumberAMS T 8504
MIL-T-8504 Cross-sectional Shape StylePlain round
MIL-T-8504 Tube Wall Thickness0.035 inches
MIL-T-8504 Tube First End Style:Plain
MIL-T-8504 Tube Diameter0.500 inches
MIL-T-8504 Alloy304
MIL-T-8504 TypeStainless Steel
MIL-T-8504 Maximum Operating Temp800.0 deg fahrenheit
MIL-T-8504 Tube Maximum Operating Pressure3000.0 pounds per square inch
MIL-T-8504 Tube Surface Condition And LocationOutside polished
MIL-T-8504 Tube Measuring Method And Length144.000 inches specific
MIL-T-8504 Tube Special FeaturesAerospace vehicle hydraulic systems
MIL-T-8504 Cross Reference SpecMIL-T-8504D
Misc./ShapeTubing

MIL-T-8504 Specifications
MIL-T-8504 304 Seamless Stainless Tube
MIL-T-8504 Corrosion Resistant Tube
UNS S30400 Alloy 30304 MIL-T-8504

 

TRILOK STEEL INDUSTRIES is an ISO 9001-2008 MIL-T-8504 Tube supplier, are the most versatile and widely used stainless steels in aircraft hydraulic fine tubing. We stock and distribute a large and diverse inventory of MIL-T-8504 TP304 Seamless Tube and MIL-T-8504 TP304 Welded Tube from industry-leading and widely accepted manufacturers who meet or exceed the stringent technical requirements.

Intended for use in high pressure hydraulic and pneumatic systems in which corrosion resistant materials are required. AMS-T-8504 Tube is not suitable for use in applications assembled by welding or brazing or exposed to temperatures higher than 800 Degree F, because of impaired resistance to corrosion, where subsequent anneal not possible. nA straight, hollow product, welded or seamless, of round, square, or any other cross section and continuous periphery, which does not conform in cross sectional dimensions to recognized pipe standards. MIL-T-8504 Welded Stainless Steel Tube is designed to convey fluids, gasses, and/or semisolids. It may be rolled into coils for ease in handling. For items designed to join a tube or tube fitting to another tube, pipe, or hose or fitting, see adapter (as modified); coupling (as modified); or nipple (as modified). Excludes tube, bent (as modified); pipe, metallic; spacer, sleeve; metal bar (hollow); and items with fittings, except end protectors.

MIL-T-8504 Stainless Steel Seamless Tube Dealer, MIL-T-8504 Welded Tubes Importer, MIL-T-8504 Seamless Stainless Steel Tubing Distributor, Buy of AMS-T-8504 Tube at best Price, MIL-T-8504 Seamless Tubing Stockist

Suppliers of MIL-T-8504 Stainless Steel Seamless tube, Get MIL-T-8504 TP304 Seamless stainless Steel Tubing Free Sample, MIL-T-8504 aircraft hydraulic fine tubing Manufacturers in Mumbai, India.

 

MIL-T-8504 Tube Sizes / MIL-T-8504 TP 304 Stainless Steel tubing Sizes

MIL-T-8504 Tubes are finished in accordance with customer needs regarding dimensional and wall thickness specifications as well as heat treatment for more demanding applications. In general MIL-T-8504 TP304 stainless steel seamless tube and MIL-T-8504 TP304 stainless steel seamless tube manufactured according to current standards.

 

MIL-T-8504 Properties

MIL-T-8504 Chemical Composition

304/304L TUBING TO MILT 8504

304 and 304L are austenitic alloys. These alloys are the most familiar and frequently used alloys in the stainless steel family. The L in 304L refers to a lower carbon content to allow for a greater corrosion protection when welding.

MIL-T-8504 Tubing Stock Size Range:

MIL-T-8504 Tubing OD: 032"- 5"
MIL-T-8504 Tubing Walls:.006"- .250"

Tempers: Annealed

Specifications: MILT 8504, AMS 5560, AMS5567

Typical Chemical Composition %

Weight % Ni Cr Mn C Si Mo S P Cu
Minimum 8.0018.00
Maximum 12.0020.002.00.081.00.50.03.045.75

MIL-T-8504 Tubing Mechnaical Properties

Typical Mechanical Properties

Nominal OD Nominal Wall Ultimate KSI Yield KSI Elongation in 2"
.187 and less.016 and less115 max3030
Over .01675-1003040
Over .187.012 and110 max3037
To .500 inclLess 
Over .01275-1003040
Over .500All75-1003040

 

Available Stock of MIL-T-8504 TUBE, MIL-T-8504 TP304 SEAMLESS TUBE

MIL-T-8504 TP304 Stainless Steel TubeMIL-T-8504 TP304 Stainless teel Tube
MIL-T-8504 stainless steel TubeSAE MIL-T-8504 Tube
MIL-T-8504 TP304L Stainless Steel TubeMIL-T-8504 TP 304 Tube
MIL-T-8504 Seamless Stainless Steel TubeMIL-T-8504 TP 304 Seamless Tube
MIL-T-8504 TP304 Welded Stainless Steel TubeAMS-T-8504 Seamless Tubes
304 MIL-T-8504 Stainless Steel Round TubeMIL-T-8504 Grade 304 Tube
MIL-T-8504  TP304 TubeMIL-T-8504 Gr. 304 Tube
MIL-T-8504 Corrosion Resistant TubeMIL-T-8504 Stainless Steel Seamless Tubing
MIL-T-8504 TP304 Stainless Steel Rectangular TubeWelded stainless steel tube MIL-T-8504
MIL-T-8504 1/8 Hard Stainless steel tubeMIL-T-8504 Aerospace tubing
MIL-T-8504 TubingMIL-T-8504 Steel tubing

 

MIL-T-8504 TUBE Price List

MIL-T-8504 TP 304 Seamless Stainless Steel Tubing

Product Name: MIL-T-8504 TP 304 Seamless Stainless Steel Tubing
Manufacturer Test Certificate 
IBR Test Certificate (Form III-D) 
Laboratory Test Certificate from Govt. Approved Lab. 
Under Third Party Inspection with Excise Gate Pass to avail
Modvat benefit.

MIL-T-8504 TP 304 Seamless Stainless Steel Tubing Value Added Services

  • Draw & Expansion as per required Size & Length
  • Polish (Electro & Commercial) Heat Treatment
  • Bending
  • Annealed & Pickled
  • Sand Blasting
  • Machining Etc.

Internal and external protection

We perform sandblasting according to SA 2,5 and protect the Tube surfaces from rust using a primer such as clear varnish, epoxy or zinc phosphate, etc. Upon request, we provide Tube protection by means of polyethylene, polypropylene, fibre-cement casing, or with bitumen. All kinds of paint coatings and galvanisation are also available.

 

MIL-T-8504 TP 304 Seamless Stainless Steel Tubing Advantages

These MIL-T-8504 Stainless Steel Tube grades are sold to a wide range of industries/markets, due to their overall corrosion resistance and good machinability:

  • High strength
  • Resistant to high mechanical stresses
  • Resistant to high pressure
  • Resistant to high temperature
  • Good formability
  • Reusable

MIL-T-8504 Tubing Packaging

MIL-T-8504 tubing shall be properly separated by size’(outside ~~~me~~~, and wall thickness. The ends of MIL-T-8504 tubing shall be sealed exclude dirt and dust.

MIL-T-8504 Tubing Packaging for shipment. Material shal1 be packaged for shipment in accordance with the methods prescribed in MIL-STD-163.

MIL-T-8504 Marking of shipments. Interior packages and exterior shfpping containers shal1 be marked in accordance with MIL-STO-129. The identification shall include the following information listed in the order shown: Stock No. or other identification number as specified in the purchase document TUBING, STEEL, CORROSION-RESISjANT [304), AEROSPACE VEHICLE HYDRAULIC SYSTEM, 1/8 HARD ‘CONDITION MIL-T-8504 Size (diameter), Wall thickness ,Heat No., Type,Class,Quantity contained,Name of manufacturer,Name of contractor (if different from manufacturer),Contract or Order No.